Bosch Professional GLM 50-27 CG Original Instructions Manual page 25

Area Measurement
Press the button to open the Functions menu.
Select area measurement
Briefly press the button to switch on the laser.
Press the button to start the first measurement, e.g. the length of a room.
Press the button to start the second measurement, e.g. the width of a room.
3.810 m
(d)
0.0°
5.080 m
2
19.355 m
(e)
Continuous Measurement
During continuous measurement, the measured value is continually updated. You can, for
example, move a required distance away from a wall while reading off the current distance
at all times.
Three functions are available for continuous measurement, for each of which the measure-
ment is depicted differently in the display:
Min/max
8 m
Briefly press the button to switch on the laser.
Move the measuring tool until the required distance is displayed in the result line.
You can interrupt the continuous measurement by briefly pressing the
Bosch Power Tools
and confirm the selection with the
After the second measurement has been completed, the area
will be automatically calculated and displayed. The result is
displayed in the result line (e). The individual measured val-
ues are in the measured value lines (d).
The smallest and the largest measured value are permanently
shown on the display.
Press the button to open the Functions menu.
Select min/max in the continuous measurement
menu item and confirm the selection with the
English | 25
button.
button.
button.
1 609 92A 8KF | (08.05.2023)