Tools; Safety Instruments - CFE -10H User Manual


Bipolar external isolators. When two or more battery systems are connected in
parallel, each of them shall have a bipolar isolator
Make sure that the cross-sectional area of charging cables is 25 to 35 mm2.
A breaker between battery and inverter is recommended to install, and its min.
current should be over 150A or comply with local regulations.

4.4 Tools

To install the battery pack, those following tools are probably required:
Phillips
screwdriver
Voltmeter
In order to protect the safety of operators and installers, it is necessary to select and
employ suitable tools and measuring instruments that are certified for precision and
accuracy.

4.5 Safety instruments

When dealing with the battery, following safety gears should be equipped. Installers must
meet relevant requirements of IEC 60364 or domestic legislations and other relevant
international standards
NOTICE
Torque wrench
Tape measure
.
.
Cable crimper
Drill
10
Wire clamp
Flat-head
screwdriver