CFE-Residential ESS Lithium-ion Battery is characterized with:
Energy storage unit: This battery is suitable for PV solar system compatibility.
Battery management system (BMS): The battery's built-in BMS monitor prevents
the battery from running outside its design limitations.
Expandability: The battery capacity can be increased by adding another battery of
the same batch and specification.
3 Guidance for batteries during shipment
1)
Cartons that have been crushed, punctured, or torn in such a way that contents
are revealed shall be set aside in an isolated area and inspected by a skilled person.
If the package is deemed to be not shippable, relevant contents shall be promptly
collected and segregated. Meanwhile, it is required to contact the consignor or
.
consignee
2)
The DC circuit of Residential ESS has been disconnected before outgoing
3)
A precautionary label must be affixed to the shipping carton to alert individuals that
the battery within the package has been disconnected; otherwise, the battery
should not be transported
4)
We have conducted comprehensive tests of our equipment distributed around the
world to ensure safety for shipping transport. These products shall be handled with
care and immediately inspected if visibly damaged. It needs to contact with
customer careline in case of any visible damage to cartons to confirm whether the
battery could be used safely or not
4 Installation Prerequisites
4.1 Installation location
Make sure that the installation location meets the following conditions:
The building is designed to withstand earthquakes
Far away from the sea to avoid salt water and humidity
The floor is flat and level
No flammable or explosive materials nearby
Optimal ambient temperature is between 15℃ and 30°C
Temperature and humidity stay at a constant level
Minimal dust and dirt in the area
No corrosive gases present, including ammonia and acid vapor.
.
.
.
.
.
8
.
.
.
.
.
Need help?
Do you have a question about the CFE-10H and is the answer not in the manual?