Replacing Light Bulbs - Zephyr Essentials Breeze I Use, Care And Installation Manual

Hide thumbs Also See for Breeze I:
Table of Contents

Advertisement

www.zephyronline.com

REPLACING LIGHT BULBS

CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are not hot.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and falls
out.
If bulbs are difficult to turn due to prolonged use, firmly attach a glass suction cup approximately the diameter of
the bulb or use a rubber/latex glove and turn counter clockwise.
Replacement bulbs are available at most hardware stores or from Zephyronline.com.
Purchase type MR16 (GU-10) 35W halogen.
For Zephyr part numbers please turn to page 18 of the manual.
Bottom hood view
16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Breeze I and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Breeze iiAk1124xAk1100xAk1136xAk1200xAk1236x

Table of Contents