Zephyr Essentials Breeze I Use, Care And Installation Manual page 16

Breeze I, AK11xx
This switch turns the blower on and o
is o , is low speed, is medium speed and
Lights Off/Bright/Dim
is o , is bright, is dim.
Breeze II, AK12xx
This button turns the motors on and o . It also shuts o
If the lights are on and this button is pushed, they will also turn o .
This button turns the lights on, o
again for dim and one more time to shut them o .
This button will change the speed setting of the motors. By pushing it you will change the
speeds from high to medium to low.
This button will put the hood into delay o
lowest speed and the entire hood will shut down all functions after 5 minutes.
and controls the speed selection.
is high speed.
power to the whole hood.
and also dims them. Press once to turn them on bright,
mode. When pushed, the hood will switch to the
14
www.zephyronline.com