Setting Communications Parameters - Huawei SUN2000-28KTL User Manual

SUN2000 (8KTL-28KTL)
User Manual
LCD Screen
----End

7.2.8 Setting Communications Parameters

RS485 communications parameters such as the address, protocol, baud rate, and check mode
can be set on the monitoring panel.
Procedure

Issue 12 (2019-06-30)
The following table lists the procedure for setting communications parameters. The
parameter values in the figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interaction
Procedure
6. Enter a new password and press
Increase or decrease the value by pressing
or . Switch between digits by pressing
.
7. Enter the new password again and press
.
NOTE
Ensure that the re–entered password is the same as
the new password. Otherwise, an error message will
be displayed.
After the password has been changed, the
LCD displays a success message.
.
88