Steering Wheel Installation - Cube Controls FCORE User Manual

1.2 Steering wheel installation

Our F-CORE is natively compatible with every wheelbase or adapter that has a 50.8mm bolt pattern.
70mm compatibility is obtained thanks to our Universal Hub, hubs from different manufacturers or
different adapters for 50/70 compatibility!
MOUNTING A UNIVERSAL HUB
If you specifically chose our Universal Hub for compatibility and you purchased it separetely,
do not worry: mounting it is the easiest thing in the world.
You will need to use the three M3x8 black bolts to tighten the hub in three positions (use the
TX25 key that you were supplied with) and you're good to go. You will then be able to mount
the wheel to whatever QR or wheelbase of your choice.
In the image, you can see highlighted in blue the M5x0.8 metric holes. In grey, 5,5mm through
holes. Both of them are available in 70mm or 50.8mm bolt patterns. Through holes are rotated
by 180, so flipping your adapter to match the wheel hub may be needed.
Inner 50.8mm
pattern
Outer 70mm
pattern