Cube Controls FCORE User Manual page 13

SWITCHING BETWEEN BLE AND USB MODES:
Press and hold button 22 and turn on the steering wheel via the dedicated On/Off button on
the backside of the wheel.
Turning off the steering wheel and repeating the procedure will allow you to toggle between
the two different connection modes.
The device will always boot up to the latest connection method used.
WHEN IN BLE MODE:
The top right LED should flash in blue. This means the wheel is in discovery mode or waiting
to connect.
Open the Bluetooth devices on your PC and click "add device".
Click on the "Bluetooth" option and wait for the device to show up in the device list.
Select the device and wait for the pairing to end. The LED should flash quickly when pairing
and stay fixed once pairing is completed.
Once paired, each time the device is turned on with BLE mode selected it will automatically
connect to the PC. The operating range is usually around 10 meters but will be reduced if
obstructions are present between the device and the PC.
IMPORTANT: To ensure full BLE compatibility we suggest to use in combination with an external
Bluetooth antenna/dongle. Also, after each Firmware update remember to delete the Device
from the BT page and pair it again to avoid connection conflicts.