CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60 Zhouzi St., Neihu District, Taipei 114
Taiwan
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
To download this QIG or a more complete user manual, please visit
http://www.ctcu.com/Industrial/
© 2014 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
IMC-1000M-PH(E)12 & IMC-1000MS-PH(E)12 are Gigabit Ethernet
PoE (Power over Ethernet) managed media converters that support
conversion between electrical 10/100/1000Base-TX and optical
100/1000Base-X Ethernet. Housed in rugged DIN rail or wall
mountable enclosures, these converters are designed for harsh
environments, such as industrial networking and intelligent
transportation systems (ITS) and are also suitable for many military
and utility market applications where environmental conditions
exceed commercial product specifications.
Features
12/24/48VDC (9.6~57VDC) redundant dual input power and built-
in very high efficient power booster
Constant and regulated PoE output voltage at 55VDC
IP30 rugged metal housing
Dual rate (100/1000M) optical support
Wide temperature range -20°C~75°C (IMC-1000M-PHE12 & IMC-
1000MS-PHE12)
Industrial grade EMS, EMI, EN50121-4, EN61000-6-2, EN61000-6-4
Specifications
Optical Interface
Standards: IEEE 802.3u, 802.3z
Speed: 100/1000M
SC connector-IMC-1000-PH(E)12
SFP slot-IMC-1000S-PH(E)12
Multimode (500m) 50/125um, 62.5/125um
Single mode (2km, 20km or 40km) 9/125um
Wavelength: 1310nm (S/M or M/M)
Ethernet Interface
Standards: IEEE802.3, 802.3u, 802.3ab
Connector: RJ-45 (shielded)
Auto MDI/MDI-X
Speed: 10/100/1000Base-T (Auto)
Duplex: Full/Half (Auto)
Jumbo Frame: 9K bytes
Link Fault Pass Through (LFP)
Power over Ethernet
1 PoE Enabled port
Supports IEEE802.3af 15.4W PoE & IEEE802.3at 30W PoE+
Positive (VCC+) pins 1, 2; Negative (VCC-) pins 3, 6
Data: pins 1, 2, 3, 4, 5, 6, 7, 8
www.ctcu.com
- 1 -
Quick Installation Guide
IMC-1000M-PH12, IMC-1000MS-PH12
IMC-1000M-PHE12, IMC-1000MS-PHE12
Industrial Grade Gigabit Ethernet PoE+ Managed Media
Converters
sales@ctcu.com
Specifications (cont.)
Power
Absolute Range: 9.6VDC~57VDC
Reverse Polarity Protection: Yes
Dual Power Inputs: Yes
Connector: Removable terminal block
Consumption:
Items
Total Power
Input Voltage
Consumption
12VDC
34.4W
IMC-1000M-
24VDC
34.9W
PH(E)12
48VDC
35.4W
12VDC
34.2W
IMC-1000MS-
24VDC
34.7W
PH(E)12
48VDC
35.4W
Mechanical
Water & Dust Proof: IP30 Protection
Dimensions: 106 mm (D) x 62.5 mm (W) x 134.8 mm (H)
Mounting: DIN-Rail, Wall Mount (Kits included)
Weight:
655g-IMC-1000M-PH(E)12, 650g-IMC-1000MS-PH(E)12
Environmental
Operating Temperature: -10°C~60°C-IMC-1000M(S)-PH12
-20°C~75°C-IMC-1000M(S)-PHE12
Storage Temperature: -40°C~85°C
Humidity: 5%~95% (Non-condensing)
Certifications
EMC: CE
EMI (Electromagnetic Interference): FCC, FCC Part 15 Subpart B
Class A, CE EN55022 Class A
Railway Traffic: EN50121-4
Immunity for Heavy Industrial Environment: EN61000-6-2
Emission for Heavy Industrial Environment: EN61000-6-4
EMS (Electromagnetic Susceptibility) Protection Level:
EN61000-4-2 (ESD) Level 3, Criteria B
EN61000-4-3 (RS) Level 3, Criteria A
EN61000-4-4 (Burst) Level 3, Criteria A
EN61000-4-5 (Surge) Level 3, Criteria B
EN61000-4-6 (CS) Level 3, Criteria A
EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m,
Criteria A
Safety: UL60950-1 (Pending)
Freefall: EN60068-2-32
MTBF (MIL-HDBK-217): 410,235 hours-IMC-1000M-PH(E)12
331,689 hours-IMC-1000MS-PH(E)12
Device Power
PoE
Boost
Consumption
Budget
Efficiency
3.9W
30W
98.4%
4.5W
30W
98.7%
4.7W
30W
97.7%
3.9W
30W
99.0%
4.4W
30W
99.0%
4.7W
30W
97.7%
Shock: EN60068-2-27
●
Vibration: EN60068-2-6
●
- 2 -
V1.0