q
e
q
q
q
q
q
Round End and Fine Fabric Buttonholes
w
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
r
The sewing procedure is the same as the square
buttonhole (refer to pages 44-46).
The machine will sew a buttonhole in the order shown.
q Starting point
Keyhole Buttonhole
w
The sewing procedure is the same as the square
buttonhole (refer to pages 44-46).
The machine will sew a buttonhole in the order shown.
Use an eyelet puncher to open a keyhole buttonhole.
w Eyelet puncher (not provided with the machine)
w
Stretch Buttonholes
w
The sewing procedure is the same as the square
buttonhole (refer to pages 44-46).
The machine will sew a buttonhole in the order shown.
q Starting point
48
MODE 1: 25, 26
AUTO
Automatic buttonhole foot R
5
NOTE:
The buttonhole width can be adjusted from 2.5 to 5.5.
The stitch density can be adjusted from 0.2 to 0.8.
5
NOTE:
The buttonhole width can be adjusted from 5.5 to 7.0.
The stitch density can be adjusted from 0.3 to 0.8.
5
NOTE:
The buttonhole width can be adjusted from 2.5 to 7.0.
The stitch density can be adjusted from 0.5 to 1.0 for
pattern 28 (mode 1), 0.5 to 2.5 for pattern 29 (mode
1). If the stitch balance of the left and right row is not
even, correct it by turning the feed balancing dial (refer
to page 77).