Multiple Zigzag Stitch (Tricot Stitch); Overcasting Stitch; Thread Tension: Auto E Presser Foot: Zigzag Foot A; E R R Foot Pressure - ELNA eXcellence 580+ Instruction Manual

q
e
q
e

Multiple Zigzag Stitch (Tricot stitch)

w

Machine settings

q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
r
This stitch is used to finish a raw edge of synthetics and
other stretch fabrics that tend to pucker.
Sew along the fabric edge leaving an adequate seam
allowance.
After sewing, trim the seam allowance close to the
stitches.

Overcasting Stitch

w
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
r
This stitch can be used to simultaneously seam and
overcast edges of fabrics.
Use this stitch when you do not need to open seams flat.
Place the fabric edge next to the guide of the foot and
then sew.
37
MODE 1: 12
AUTO
Zigzag foot A
5
MODE 1: 13
AUTO
Overedge foot C
5
CAUTION:
Stitch width should be set between 5.0 and 7.0.
The blue tipped needle is recommended for stretch
materials.