q
q
q
e
q
q
q
w
w
r
w
w
Round End and Fine Fabric Buttonholes
Machine settings
The sewing procedure is the same as the square
buttonhole (refer to pages 46-48).
The machine will sew a buttonhole in the order shown.
The buttonhole width can be adjusted from 2.6 to 9.0.
The stitch density can be adjusted from 0.2 to 1.0.
Keyhole Buttonholes
The buttonhole 27 is used for thick buttons on
medium weight fabrics.
The buttonhole 28 is used with thick buttons and
heavy fabrics.
The sewing procedure is the same as the square
buttonhole (refer to pages 46-48).
The machine will sew a buttonhole in the order shown.
Use an eyelet puncher to open a keyhole buttonhole.
w Eyelet puncher
NOTE:
The buttonhole width can be adjusted from 5.6 to 9.0.
The stitch density can be adjusted from 0.2 to 1.0.
Stretch Buttonholes
q Pattern:
e Presser foot:
The sewing procedure is the same as the square
buttonhole (refer to pages 46-48).
The machine will sew a buttonhole in the order shown.
q Starting point
NOTE:
The buttonhole width can be adjusted from 2.6 to 9.0.
The stitch density can be adjusted from 0.5 to 1.0 for
pattern 29 (MODE 1), 0.7 to 1.2 for pattern 30 (MODE 1)
and 0.5 to 2.5 for pattern 31 (MODE 1). If the stitch
balance of the left and right row is not even, correct it
by turning the feed balancing dial (refer to page 84).
51
5
5
MODE 1: 29-31
Automatic buttonhole foot R
5