Limiting Access Of One Of Your Network Computers To Internet Services - Hercules HWGADSL2P-54V2 Manual

HWGADSL2P-54V2 AnnexA
To no longer apply a rule to a computer:
6.2.2. Limiting access of one of your network computers to
Internet services
By default, the computers are able to access all Internet services. If you wish to limit access on one specific
computer to certain Internet services, however (Internet access, Peer to Peer sites...), you can use the IP
address filtering system.
To limit access on a specific computer to an Internet service:
Hercules ADSL2/2+ Wireless G Modem Router
- Select your computer.
- In the Rules applied to the selected computer
table, select the rule to be removed.
- Click the Remove from the list button.
- Once you have finished, click the Apply and
Save button to validate your settings.
- On the Home page, select Your Internet firewall
parameters.
- Click the IP Filtering button.
- Select your computer in the drop-down list.
This list sums up all network devices (Ethernet or
wireless) currently connected to your network (with
their host name and the IP address assigned to
them).
The computer on which you wish to limit
access must be connected to the network.
- Select the type of service provided.
- Select the rule to apply (or create the rule
yourself: in this case, please refer to the To create
a new rule section, coming up).
- Click the Apply button.
The selected rule is added to the list of rules
applied.
- Click the Apply and Save button to validate your
settings.
User Manual – 97/113