Windows 98 Se: Manually Enabling Or Disabling Your Adapter's Wifi Connection (Advanced Users) - Hercules HWGADSL2P-54V2 Manual

HWGADSL2P-54V2 AnnexA
4.18.6. Windows 98 SE: Manually enabling or disabling your
adapter's WiFi connection (advanced users)
You can manually enable or disable your adapter's WiFi connection for a variety of reasons: to temporarily
avoid connecting to networks, save battery power, etc.
To manually enable or disable your Hercules Wireless G adapter's WiFi connection in Windows 98 SE:
- Access the Device Manager.
- Select your Hercules Wireless G adapter in the list of network adapters.
- Right-click your adapter and select Properties.
- To enable your adapter, select Enable. To disable it, select the Disable option.
For more information on manually enabling or disabling the adapter in Windows 98 SE, please refer to the
Windows online help utility.
Hercules ADSL2/2+ Wireless G Modem Router
4. In the IP Address tab, select Obtain an IP address
automatically.
5. In the Gateway tab, if there are gateways installed,
select them and click Remove.
6. Click OK to close the windows.
Windows may prompt you to restart your computer.
To access the Internet, you can now simply launch your
Internet browser.
User Manual – 83/113