Storage - FERREX CSP50 User Manual

Storage/Disposal and recycling
Symbole

14. Storage

• Always use the guide bar cover (27) when storing.
• The spark plug wrench (28) can be inserted on the underside of the machine.
• Clean and maintain the device every time before storage, see chapter "Cleaning and main-
tenance".
• Store the device in a safe, dry, frost-free, well-ventilated place protected from the weather.
Outdoor storage is not advisable. Also secure it from unauthorised access.
• Empty the oil or fuel tank with a suction pump.
m WARNING
Do not empty the fuel tank in enclosed areas, near fire or when smoking. Petrol fumes can
cause explosions and fire.
• Start the engine and let it run until the remaining petrol is used up.
15. Disposal and recycling
The device is supplied in packaging to avoid transport damages. This packaging is raw mate-
rial and can thus be used again or can be reintegrated into the raw material cycle.
The device and its accessories are made of different materials, such as metals and plastics.
Take defective components to special waste disposal sites. Check with your specialist dealer
or municipal administration!
The packaging is wholly composed of environmentally-friendly materials that can be
disposed of at a local recycling centre.
Contact your local refuse disposal authority for more details of how to dispose of your
worn-out electrical devices.
Fuels and oils
Fuel residues, oils and liquids used for cleaning must be disposed of in an environmentally
friendly manner!
Empty oil and fuel tanks must be disposed of in an environmentally friendly manner.
Dispose of liquids and containers at appropriate collection centres.
36