Storage - FERREX 25CC User Manual

Technical data/Storage Kapitelüberschrift
Sound and vibration
Sound pressure level L
Uncertainty K
pA
Guaranteed sound power level L
Measured sound power level L
Uncertainty K
wA
Vibration Front Handle a
Vibration Rear Handle a
Uncertainty K
hv

Storage

m CAUTION
Never put the equipment into storage for longer than 30 days without carrying out
the following steps.
Store the euqipment in a secure, dry, frost-free and well-ventilated location that is
protected from the effects of weather.
Outside storage is not recommended. Secure it against unauthorised access.
If you intend to store the equipment for longer than 30 days, it must be
prepared accordingly. Otherwise the fuel still remaining in the carburettor will
evaporate and leave a rubbery sediment. This can cause problems when starting up
the equipment and may require expensive repairs.
Slowly remove the fuel tank cap to release any pressure that may have formed in
1.
the tank. Carefully empty the tank of fuel.
To remove the fuel from the carburettor, start the engine and let it run until the
2.
equipment stops.
Leave the engine to cool (approx. 5 minutes).
3.
Remove the spark plug. You will need the supplied combined spark plug span-
4.
ner/screwdriver.
Add one teaspoon of 2-stroke engine oil into the combustion chamber.
5.
Slowly pull the starter cord several times to apply a layer of oil to all internal
6.
parts. Refit the spark plug.
50
pA
wA
wA
h
h
99.2 dB(A)
3 dB(A)
113 dB(A)
110.4 dB(A)
3 dB(A)
8.98 m/s²
8.03
1.5 m/s²