Technical Data - FERREX CSP50 User Manual

Technical data

7. Technical data
Weight unfuelled, without cutting gear approx. .......5.2 kg
Weight unfuelled, with cutting gear approx. ............6.4 kg
Fuel tank ......................................................ca. 550 cm
Tank for chain lubricating oil ................ca. 260 cm
Usable cutting length* /
Guide bar ....................................................................... 44 cm (18")
Max. chain speed .................................................................. 22m/s
Chain pitch ...................................................... 8.255 mm (0.325")
Driving link thickness ....................................... 1.5 mm (0.059")
Type of saw chain ........................KANGXING : 325-058-72BL
Type of guide bar ....................... KANGXING: BE18-72-5810P
Chain wheel tooth pitch ............ 7 teeth/8.255 mm (0.325")
Engine displacement ....................................................................... 45 cm
Max. engine power output per ISO 7293 .................................. 1.8 kW
Idle speed n ........................................................................................ 3400 min
0
Speed n ............................................................................................ 12000 min
max
Spark plug ............................................................................................ L8RTF
* The actual cutting length may be less than the specified cutting length.
Noise
Sound pressure level L
Uncertainty K ..........................................................................3 dB
pA
Sound power level L
per ISO 22868 ..............................................................113.0 dB(A)
Uncertainty K .........................................................................3 dB
WA
Wear hearing protection.
Excessive noise can result in a loss of hearing.
The specified device emissions values have been measured in accordance with a standard-
ised test procedure and can be used for the comparison of one tool with another.
The specified noise emission values can also be used for an initial estimation of the exposure.
20
per ISO 22868 .............111.4 dB(A)
pA
WA
(550 mL)
3
(260 mL)
3
3
-1
-1