Computer Input; Input Source Selection (Rgb: Computer 1/ Computer 2) - Sanyo PLC-XE34 Owner's Manual

Input Source Selection (RGB: Computer 1/Computer )
Direct Operation
Choose either Computer 1(RGB) or Computer (RGB) by pressing the COMPUTER 1 or COMPUTER 2 button
on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
COMPUTER 1 button
COMPUTER  button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
►

Use the Point buttons to select Computer 1.
▲▼
3
When Computer 1 is selected, press the Point
button to access the submenu items. Use the Point
buttons to select the RGB input source and then
▼
press the SELECT button.
✔Note:
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.44).

Computer Input

Computer 1(RGB)
Computer 1(Scart)
Computer  (RGB)
buttons to select Input and
▲▼
or the SELECT button.
Input Menu
►
▲
Computer
1
►
Computer 1
RGB
Component
RGB(Scart)
S-video
7