Image Button; Screen Button - Sanyo PLC-XE34 Owner's Manual

Basic Operation
NO SHOw button
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button. When the projected image is
captured and is set as User in the Logo selection (p.47), the
screen changes each time you press the NO SHOW button as
follows.
black out → captured image → normal →
✔Note:
When use the MUTE button to release the No Show
function, the mute function can not be operated at the same
time.
P-TIMER button
Press the P-TIMER button on the remote control to operate
the Count up/Count down function. Refer to p.51 for detail of
Setting for the P-timer function.
To stop the count time, press the P-TIMER button.
To cancel the P-timer function, press and hold the P-TIMER
button.

IMAGE button

Press the IMAGE button on the remote control to select a
desired image mode of the screen. See pages 32, 39 for
details.

SCREEN button

Select the screen size (See pages 34-35, 42 for details).
6
• • • • •
No show disappears after 4 seconds.
0
P-Timer display
Note:
✔
See the previous page for the description of
other buttons.
SCREEN button
P-TIMER button
NO SHOw button
IMAGE button