Advertisement
Available languages
Available languages
MEGA LIVE TARGETLOCK FOOT PEDAL Installation Guide
3
| Pair the Foot Pedal to the Control Head
Use the following instructions to pair the wireless foot pedal to the Humminbird control head. For more information about setting up your
foot pedal or your MEGA Live TargetLock, see the MEGA Live Imaging Operations Guide.
APEX/SOLIX Series
1. Press the HOME key.
2. Select Settings > CHIRP Sonar > MEGA Live > Pair TargetLock Foot
Pedal.
3. On your foot pedal, press and hold the Left button and the Right
button at the same time until the LEDs at the top of the pedal begin
to scroll. Then release the buttons.
4. The control head and the foot pedal will go into Pairing Mode.
If 30 seconds pass while in Pairing Mode and they do not successfully
pair, an error message will display signaling that the pairing has timed
out. Repeat the procedure.
NOTE: After pairing completes, if the lights on the foot pedal blink in a
scrolling pattern, this indicates that the control head is updating the
foot pedal. When the software update is complete, the pairing process
will need to be repeated.
NOTE: You can check the MEGA Live Device List to confirm that the foot
pedal is paired. Select Home > Settings > CHIRP Sonar > Device List.
HELIX Series
1. Main Menu: On your control head, press the MENU key twice.
2. Select the Accessories tab > MEGA Live > MEGA Live Installation.
3. Select Pair TL Foot Pedal, and press the RIGHT Cursor key.
4. On your foot pedal, press and hold the Left button and the Right button at the same time until the LEDs at the top of the pedal begin
to scroll. Then release the buttons.
5. The control head and the foot pedal will go into Pairing Mode.
If 30 seconds pass while in Pairing Mode and they do not successfully pair, an error message will display signaling that the pairing has
timed out. Repeat the procedure.
NOTE: After pairing completes, if the lights on the foot pedal blink in a scrolling pattern, this indicates that the control head is updating
the foot pedal. When the software update is complete, the pairing process will need to be repeated.
NOTE: You can check the MEGA Live Device List to confirm that the foot pedal is paired. Press the MENU key twice to open the Main Menu.
Select the Accessories tab > MEGA Live > Device List.
WARNING
THIS PRODUCT CONTAINS A BUTTON BATTERY.
If swallowed, a lithium button battery can cause severe or fatal injuries
within 2 hours. Keep batteries out of reach of children. If you think
batteries may have been swallowed or placed inside any part of the
body, seek immediate medical attention.
NOTE: Download Humminbird installation guides and operations
manuals from our Web site at humminbird.com.
NOTE: Product specifications and features are subject to
change without notice.
left/pairing
Contact Humminbird
Contact Humminbird Technical Support through our Help Center
at https://humminbird-help.johnsonoutdoors.com/hc/en-us or in
writing to the address below:
Humminbird Service Department
678 Humminbird Lane
Eufaula, AL 36027 USA
© 2023 Johnson Outdoors Marine Electronics, Inc. All rights reserved.
532966-1_A
Foot Pedal
LED lights
TargetLock
One-Boat
right/pairing
Network
2
Advertisement
