Connecting To Apictbridge-Compatible Printer - Sanyo Xacti VPC-S500 Owner's Manual

CONNECTING TO A
PICTBRIDGE-COMPATIBLE PRINTER
Even if you do not have a computer, you can connect the camera directly to a printer
that supports PictBridge to perform image selection and printing using the camera
screen and controls. DPOF support also lets you specify which images you want to
print and how many copies of each should be printed.
Connecting the camera to the printer
1. Rotate the mode dial to and turn your camera on by pressing the power switch.
2. Press the four-way controller ( ) to select the [Set-up2] menu, then use the
four-way controller ( ) to select [USB Mode]. Press the button.
3. Use the four-way controller ( ) to select [PictBridge], then press the button.
4. Connect your camera and the printer via a supplied USB cable.
The message "One moment" will appear on the LCD monitor screen.
EN-63