Getting Started; Turning The Power On/Off; Choosing The Screen Language - Sanyo Xacti VPC-S500 Owner's Manual

GETTING STARTED

Turning the Power On/Off

Press the power switch until the digital
camera turns on.
To turn the power off, press the power
switch again.

Choosing the Screen Language

Follow the steps below to choose the desired language.
1. Rotate the mode dial to
camera on by pressing the power switch.
2. [Set-up1] is displayed.
3. Use the four-way controller ( ) to select
[Language], then press the
4. Use the four-way controller (
the language you want.
5. Press the button to confirm.
EN-20
and turn your
button.
) to select
Power switch
Set-up1 Set-up1 Set-up1 Set-up2 Set-up2 Set-up2
Format Format
Beeper Beeper Beeper
Date & Time Date & Tim te & Time
Language Language Langu
Set-up3 Set-up3 Set-up3
Louder Louder Louder
m/d/y m/d/y m/d/y
English Englis En lish
Select : Select : Select :