Editing And Setting Channels - Sanyo DP32242 Owner's Manual

EDITING AND SETTING
CHANNELS
The current channel settings can be changed according
to your needs and reception conditions.
ANT/CABLE SETUP AND OPERATION
1
Press MENU button on the remote control and use
the CURSOR
menu. Press the OK button.
2
Use CURSOR
Cable setup function. Press the OK button.
Auto program (Set automatically)
Automatically searches and adds available channels to
the memory.
1
Use CURSOR
Antenna / Not used). Press the OK button.
2
Use CURSOR
Program mode. Press the OK button.
22
buttons to select SETUP
buttons to highlight ANT/
buttons to select (Cable /
buttons to select Auto
3
Use CURSOR
mode function. Press the OK button.
Note:
After the scanning is completed, select Apply.
All previously saved channels are erased.
Manual program
Add or remove channels from memory, edit channel
caption and set favorite channels.
1
Use CURSOR
Program mode. Press the OK button.
2
Press Edit item. Use CURSOR
select the setting you want to adjust and press the
OK button.
3
Use CURSOR
edit (Caption / Favorite / Add). Press the OK button.
buttons to select scanning
buttons to select Manual
buttons to
buttons to select the item to