Advertisement
2.4 Restriction of use
The Turbo£ Stripper is exclusively for removing bonded floor covering in dry
environments. It should not be used for any other purpose. Sinclair Equipment
Company cannot be held responsible for any damage or loss caused by incorrect
use.
2.5 Genuine Spare Parts
Spare parts and accessories are manufactured uniquely for the Turbo£ Stripper. It must be
emphasized that parts obtained from unauthorized sources must not be used.
Sinclair Equipment Company cannot be held responsible for the performance of or any damage
arising from the use of machines in which genuine spare parts have not been used.
This is particularly important with replacement blades.
2.6 Low-voltage Protection
The Turbo Stripper is equipped with a low-voltage protection switch. The power supply
breaks if current fluctuation or main power failures occur, thus preventing serious accidents.
Due to the restart protection, the machine will not restart after a power failure, even if the
operation switch has not been switched off.
For using the protective cut-out switch see item 5.0.
5
Advertisement
