Advertisement
Transport
Always remove the blade before transporting the machine.
Disconnect the power supply and the plug of
the clutch before removing the handle. Otherwise
you might damage the hydraulics of the clutch.
Mount the steel plate (1) instead of the clutch.
Turn thumb screw (3) clockwise until the drive
wheels are locked. This way the machine cannot
move by itself.
Never transport the machine without the
wheels blocked.
2.2 Introduction
This operating manual should be used to receive the maximum benefit from your Turbo£
Stripper. Following these instructions will both extend the life of your machine and reduce
repair costs.
Please make sure any user of the machine is familiar with these instructions before work
begins.
2.3 Danger while working with the machine
The Turbo£ Stripper is designed to the highest technical standards. Incorrect use can be
dangerous!
Use this machine only:
- As instructed in this operating manual.
- With the machine in perfect working order.
Disturbances that could impair safety have to be eliminated at once.
4
Advertisement
