Proximity Probe Driver Specifications - Pro DP1008 Series Product Manual

Proximity Probe Driver Specifications

PRO Model:
Environmental
Temperature Range:
Humidity Range:
Electrical
* Note: All specifications acquired through use of a AISI 4140 steel target, 1 in. diameter
Linear Range
Calibrated Linear Range:
Nominal Output:
Nominal Sensitivity:
Resolution:
Incremental Scale Factor (ISF)
* Note: When measured over calibrated linear range in increments of 10 mils
32°F (0°C) - 113°F (45°C)
5 Meter System
9 Meter System
Deviation from best fit Straight Line (DSL)
* Note: When measured over calibrated linear range in increments of 10 mils
32°F (0°C) - 113°F (45°C)
5 Meter System
9 Meter System
-31°F (-35°C) - 248°F (120°C)
5 Meter System
9 Meter System
Frequency Response
0 - 10 kHz (+0, -3 dB)
* Note: Frequency Response range valid with up to 1000 ft of field wiring
DD1008 Series
-31°F (-35°C) - 185°F (85°C)
0 - 95% relative, non-condensing
25 - 525 mils (0 .60mm - 13 .33mm)
-1 .5 to -11 .5V
dc
-20 mV/mil (-0 .787 V/mm)
0 .5 microns
-20 mV/mil (-0 .787 V/mm) ±20%
-20 mV/mil (-0 .787 V/mm) ±20%
±12 mil
±12 mil
±36 mil
±36 mil
7