Proximity Probe Specifications - Pro DP1008 Series Product Manual

Proximity Probe Specifications

PRO Model:
Environmental
Temperature Range:
Humidity Range:
Pressure Rating:
Electrical
* Note: All specifications acquired through use of a AISI 4140 steel target, 0.5 in. diameter.
Linear Range
Calibrated Linear Range:
Nominal Output:
Nominal Sensitivity:
Incremental Scale Factor (ISF)
* Note: When measured over calibrated linear range in increments of 10 mils
32°F (0°C) - 113°F (45°C)
5 Meter System
9 Meter System
Deviation from best fit Straight Line (DSL)
* Note: When measured over calibrated linear range in increments of 10 mils
32°F (0°C) - 113°F (45°C)
5 Meter System
9 Meter System
-31°F (-35°C) - 248°F (120°C)
5 Meter System
9 Meter System
DP1008 Series
-31°F (-35°C) to 350°F (177°C)
0 - 95% relative, non-condensing
Probe tip is designed to withstand a pressure
difference from machine to ambient via a Viton®
O-ring . If pressure testing is required contact CTC .
25 - 525 mils (0 .60mm - 13 .33mm)
-1 .5 to -11 .5 V
dc
-20 mV/mil (-0 .787 V/mm)
-20 mV/mil (-0 .787 V/mm) ±20%
-20 mV/mil (-0 .787 V/mm) ±20%
±12 mil
±12 mil
±36 mil
±36 mil
4