ADTRAN NetVanta 2000 Series Quick Start Manual page 12

To LAN Access Policy Configuration (continued)
1
5
7
8
1. Select OTHER and enter the remote unit's assigned LAN IP network address and associated mask bits.
2. Select OTHER and enter the local NetVanta 2000's assigned LAN IP network address and associated
mask bits.
3. Select ANY to forward all TCP/UDP ports, or select OTHER and enter the port (or port range) in the field
below it.
4. Select ALL to forward all data protocols, or select OTHER and enter the protocol value (using decimal
notation) in the field below it.
5. Select PERMIT to configure this policy to permit only the specified data.
6. Set Enable Log to No.
7. Set Enable NAT to No.
8. For Security, select No.
9. Click Submit to register this policy.
12
2
3
4
6
9