Page 2
BDM 201 The BDM 201 dynamic microphone is designed to be used with our MITRE, ADEPT and VIGIL amplifiers. To Operate Press ‘Speak’ and make the announcement. If a pre-announcement chime is being used, the ‘Speak Now’ delay function must be selected. The LED will illuminate after 2.5 seconds indicating that the system is ready for the message.
Page 3
ACCESS WHITE +24V ACCESS BLACK +24V +24V Fig 2 - BDM201 Schematic PC1146 FIG 3a - BDM 201 - Wall Mounting Dimensions FIG 3b - BDM 201 - To remove the base 65mm 3. Slide top forward and off base 4mm fixings 2.
Page 4
NOTE Mic. sensitivity increases by 12dB (factor of four) when limiter is selected. * = Standard settings as despatched from the factory Fig 5 - BDM201 - Inserting Company Logo Your Company Logo here - 4 - Issue 3...