Baldwin Boxall BVRDTSM Basic User's Manual

Touch screen microphone

Hide thumbs Also See for BVRDTSM:

Download this manual

BVRDTSM

Touch Screen Microphone

Basic User Guide

Making a Non-Emergency Paging Announcement to all areas

1. Use the NFC card to login where indicated or login using the password.

2. To page to ALL zones with the key in the upright position.

3. Push and hold down the Press to Talk (PTT) button, and speak into the microphone. This will call to ALL

zones "Live" will appear on each Zone Location button and

is pressed.

4. On completion of the broadcast release the PTT button.

5. Once PTT is released no further speech will be broadcast, the "Live" indicator will extinguish.

Making a Non-Emergency Paging Announcement to specific zones only

1. Use the NFC card to log in where indicated or login using the password (Default 5555)

2. Press the zone/area name on the touchscreen, the display will show selected for the chosen zone.

3. Select all required zones, scrolling to additional pages for additional zones as required.

4. Once all required zones are selected, press the PTT button and speak into the microphone. The broadcast

will be made to the selected zones only. "Live" will appear on the selected zone location and 'speak now'

will be green while the speak button is pressed.

5. Once PTT is released no further speech will be broadcast, the "Live" indicator will extinguish.

6. Selected zones are automatically deselected once the PTT button is released.

7. To broadcast further messages to these areas the zones are to be re-selected. Failure to re-select zones

will result in an ALL CALL announcement.

speak now

will be

green

while the PTT button

Page 1 BVRDTSM Touch Screen Microphone Basic User Guide Making a Non-Emergency Paging Announcement to all areas 1. Use the NFC card to login where indicated or login using the password. 2. To page to ALL zones with the key in the upright position.
Page 2 Making an Emergency Paging Announcement 1. Turn the key to the right to access EMERGENCY MODE – there is no need to log in. Emergency mode broadcasts are of a higher priority than normal paging broadcasts and will • override all other broadcasts (except for a dedicated fireman’s microphone, if installed). Any messages being broadcast will be interrupted during the emergency paging announcement •...
Page 3 7. To cancel a digital stored message, repeat the process above and select cancel message on the message selection screen. For enhanced microphone features please refer to the full BVRDTSM manual which can be found on the Baldwin Boxall website...