Table of Contents
Advertisement
—
7. Getting started
Before you start, make sure following documents and the application program are available:
1.
3ADR025003M99*: "Regulations Concerning the Setting up of Installations AC500 Control Sys-
tem, AC500-S Safety PLC"
2. 3ADR025091M*: AC500-S Safety User Manual
3. Exemplary Automation Builder project for TA514-SAFETY: TA514-SAFETY Training Case Project at
http://www.abb.com/PLC
To edit the provided application program for TA514-SAFETY, the following Software is
needed:
• Automation Builder V1.1 (or higher)
See also "PS501-S License enabling package" for Safety: 3ADR025001M06* at
www.abb.com/PLC
A modification of the safety application program generates a new project CRC version
number.
The exemplary project is NOT intended to be used on real machines. It is for training
purposes only.
Programming Guidelines described in AC500-S Safety User Manual shall be followed.
PAGE
12/31
and follow license guidelines for Automation Builder.
REV.
LANG.
B
en_US
TA- 5 14- S A FET Y AC 50 0 - S T R A I N I NG CA S E
NOTICE
NOTICE
WARNING
DATE
2021/09/15
DOCUMENT ID.
3ADR025217M6801
Advertisement
Table of Contents
