Table of Contents
Advertisement
TA- 5 14- S A FET Y AC 50 0 - S T R A I N I NG CA S E
—
4. Product overview
TA514-SAFETY Training Case demonstrates product features of AC500-S Safety PLC components like
SM560-S Safety CPU, AI581-S Safety Analog Input Module, DI581-S Safety Digital Input Module, DX581-S
Safety Digital Input / Output Module and TU582-S Safety Terminal Unit as part of AC500 sys-tem.
AC500-S is a Safety PLC (Programmable Logic Controller) comprising I/O modules to which a safety de-
vice, e.g., an emergency stop switch, safety light curtain or any other device could be connected. In
TA514-SAFETY, functional safety related diagnostic functions of the Safety PLC can be experienced as
well as the main safety function of AC500-S Safety PLC e.g. to read safety digital and analog inputs and
to control the safety digital outputs according to a user-defined IEC 61131 application program and con-
figuration.
TA514-SAFETY Training Case is designed to demonstrate the following configuration scenarios of Safety
CPU and IOs:
• The communication of SM560-S Safety CPU to Safety I/O modules using a PROFIsafe profile for safe
data transmission in both central and remote configurations
TA514-SAFETY Training Case is designed to demonstrate the following functionalities:
• Configuring the safety hardware
• Safety I/O mapping
• I/O wiring test
• Channel passivation and reintegration
• Channel reintegration through program
• Module passivation
• Module reintegration
• E-ERR usage
• PLCopen Safety function block usage
• Data exchange between SM560-S and PM573
WARNING
AC500-S Safety User Manual [3.] warnings must be taken into consideration.
DOCUMENT ID.
REV.
LANG.
DATE
PAGE
3ADR025217M6801
B
en_US
2021/09/15
7/31
Advertisement
Table of Contents
