Page 1
This document is valid for the TPL-C series: TPL76-C Purpose TPL-C turbocharger The assembly instructions explain how the ABB The reliable peak performer turbocharger is fitted to the engine correctly and without any health and safety risks. Target group The assembly instructions are intended for engineers and mechanics responsible for fitting the turbocharger on the engine.
Introduction Purpose of the assembly instructions The assembly instructions explain how the ABB turbocharger is fitted to the engine correctly and without any health and safety risks. This element of the documentation is supplied with the product, as is required for partly completed machinery in accordance with machinery dir- ective 2006/42EC.
ABB Switzerland Ltd, Turbocharging is identified as ABB Turbocharging in this document. Official service stations of ABB Turbocharging Official service stations are regularly audited and certified by ABB Turbocharging. See also chapter Contact address and after-sales service. Definition of warning, caution, note...
Safety Introduction State of the art Turbochargers manufactured by ABB Turbocharging are state of the art and comply with the pertinent safety and health-protection requirements that applied when the turbocharger was manufactured. Consequently, the turbocharger is safe to operate. CE conformity information ABB turbochargers fulfil machinery directive 2006/42/EC and are considered partly com- pleted machinery as defined by Article 2 g.
Storage of new turbochargers and spare parts up to 6 months New turbochargers and spare parts from ABB Turbocharging can be stored in sealed pack- aging without additional mothballing measures for up to 6 months from the date of delivery (marked by the VCI label on the package).
Page 20
Inspect the package for damage. If the package is damaged, the turbocharger must be in- spected by an ABB Turbocharging Service Station and repacked. After every 3 years the following work steps must be performed by an ABB Turbocharging Service Station: ¡...
A rating plate is attached to the turbocharger foot, one on the left and one on the right. On turbochargers with insulation from ABB, at least one additional rating plate is attached to the insulation of the gas outlet casing.