TA- 5 14- S A FET Y AC 50 0 - S T R A I N I NG CA S E
For information on how to place or remove AC500/AC500-S modules please refer to
Installation Instructions of AC500/AC500-S modules at http://www.abb.com/PLC.
Hot plug and hot swap of energized modules is not permitted. All power sources (supply
and process voltages) must be switched off while working on any AC500 system, including
Safety Modules.
Exceeding the maximum process or supply voltage range (< - 35 VDC or > + 35 VDC) could
lead to unrecoverable damage of the system.
DOCUMENT ID.
3ADR025217M6801
REV.
LANG.
B
en_US
NOTICE
WARNING
WARNING
DATE
2021/09/15
PAGE
17/31