Cerio CS-2208G-8PA2 User Manual page 18

ID. So, the Administrator has to change the PVID to the default setting, 1, then, delete the
VLAN ID group.
To "Create New VLAN"
Please be noted that VLAN ID must be within the value 1 ~ 4094.
VLAN ID: Please enter a value 1 ~ 4094.
Port Numbers: Can be set as "Non-Member," or "Tag Egress Member," or "Untag Egress
Member" by just clicking on the rectangle beneath the port numbers.
Click "Apply" to refresh the settings.
PVID values, then, can be chosen from one of the values set as VLAN IDs.
V2.0b