13. Loop Detection / Prevention
Loop detection / Prevention can be used in a network topology to prevent or detect Layer 2
loops that occurs due to misconfigurations. When a loop occurs, administrator can go to
user manual "System" (section 3.) to monitor loop status, and tick Off Loop to unlock for
desired ports.
Off: Administrator can disable loop detection or prevention function.
Loop Detection: Administrator can select used loop detection mode to detect network
situation. (2 Port LDE is off from looping Ports)
Loop Prevention: Administrator can select used loop Prevention mode to prevent
network looping. When Loop Prevention function is used, administrator can prevent loop
from happening in the "3. System" Page.
V2.0b