Online Setup; Introduction; Wifi Module; Connect To Wifi Network - Geo Trio II User Manual

Online Setup

Introduction

Depending on your energy provider,
your monitor may be enabled to
connect to remote cloud services
using an inbuilt WiFi module.

WiFi Module

If your Trio II has been supplied with
the optional WiFi module, then please
refer to the Online Setup Guide that
accompanies this user manual.
To install the module, make sure the
monitor is disconnected from the
power supply and any batteries are
removed, then remove the panel from
the rear of the monitor and insert the
WiFi module.
Remove and insert the WiFi module

Connect to WiFi Network

Your monitor will need to be
connected to a local WiFi network to
enable cloud services.
Access WiFi settings screen
•
Press the menu (i) button on
the Home screen
•
Scroll down to
•
Scroll down to
•
Touch Set up network
Connection methods
There are three different ways to
connect to a local WiFi access point:
•
Use another WiFi device - such
as smart phone or laptop - and
connect to the monitor (preferred
method)
•
Use the WPS button on your
broadband router
•
Scan for the network and connect
manually
Follow the on-screen instructions on
connecting using one of the methods
above.
Online Setup
Settings
WiFi Network
27