Nexo GEO M10 Series Service Manual
Hide thumbs
Also See for GEO M10 Series:
- Setup manual (79 pages) ,
- User manual (16 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nexo GEO M10 Series
Summary of Contents for Nexo GEO M10 Series
- Page 1 DP2660-03a-DI GEO M10 Series – MSUB15 Accessories Service Manual...
-
Page 2: Please Read Carefully Before Proceeding
PLEASE READ CAREFULLY BEFORE PROCEEDING IMPORTANT NOTICE This manual has been provided for the use of authorized NEXO Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically NEXO Products, are already known and understood by the users, and have therefore not been restated. - Page 3 PLEASE READ CAREFULLY BEFORE PROCEEDING Page 3/29 HIGH SOUND PRESSURE LEVELS Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient period of time.
-
Page 4: Table Of Contents
Page 4/29 CONTENTS CONTENTS PLEASE READ CAREFULLY BEFORE PROCEEDING ......................2 CONTENTS ...................................... 4 ACCESSORIES ..................................5 GENERAL INSTRUCTIONS ..............................6 ....................................6 AFETY FIRST ..........................6 ECHANICAL MAINTENANCE OF THE SYSTEM ..................................6 PEAKER CONNECTION : LF HPB10N R2 ......................... 7 ECONE PROCEDURE DRIVER : HPB15NF-078............................ -
Page 5: Accessories
Page 5/29 ACCESSORIES ACCESSORIES A full range of accessories that provides safe, flexible and simple means of installing GEO M10 and MSUB15 in fixed installations as well as in touring applications VNI-BUMPM10 VNT-BUMPM10 VNT-EXBARM10 VNT-MNSTKM10 VNT-GSTKM10L VNT-GSTKM10S VNT-GSTKM10M12L VNT-GSTKM10M12S VNI-LNKM61018 GMT-LBUMPM10 GMT-EXBARM10L GMT-FLGM10... -
Page 6: General Instructions
Inspect components for damage or loose hardware visible, if defects are found, the component must be discarded. All technical operations such as heat or surface treatment, grinding, welding are prohibited on Rigging components. After cleaning, the rigging system must be treated with a suitable lubricant to prevent rusting. NEXO recommends the use of Scottoil FS365 which is a water-based lubricant with a mixture of machine oil, surfactant and anti-rust treatment. -
Page 7: Recone Procedure: Lf Driver Hpb10N R2
Testing facilities - Multimeter, signal generator, Amplifier The repair procedure for bass drivers is almost the same one for other Nexo chassis loudspeakers. Once the reason for failure has been established and a recone is necessary, strip the chassis in the normal way using the cutter and chisel, ensuring that the coil gap is covered with tape. -
Page 8: Recone Procedure: Hpb15Nf-078
Testing facilities - Multimeter, signal generator, Amplifier The repair procedure for bass drivers is almost the same one for other Nexo chassis loudspeakers. Once the reason for failure has been established and a recone is necessary, strip the chassis in the normal way using the cutter and chisel, ensuring that the coil gap is covered with tape. -
Page 9: Method Of Disassembly Geom10
GEOM10 Page 9/29 ETHOD ISASSEMBLY GEOM10 ETHOD ISASSEMBLY TOOLS: Torx bits or wrench Tx20 / Tx25 / Tx30 / Tx40 / Tx45 ALLEN Wrench (3). 10mm closed-end wrench or Hexagonal socket. Tightening torque ➢ T1: 3.5 Nm ➢ T2: 5.5 Nm... -
Page 10: Front Cabinet
Page 10/29 GEOM10 ETHOD ISASSEMBLY 3.1 Front Cabinet Remove the front cabinet (8 screws Tx25). GEOM10: Pull the lever to remove the grille on the side (attached with a sling). Tightening torque: T1 Remove the front panel (8 screws Tx25). GEOM10-I: Remove the 4 screws (Tx25) to remove the grille. -
Page 11: Side Rigging
GEOM10 Page 11/29 ETHOD ISASSEMBLY 3.2 Side Rigging Remove 4 screws (Tx45) to remove the side rigging. WARNING don’t split the subassemblies. Tightening torque: T2 GEOM10 GEOM10-I 3.3 Passive filter Remove 4 screws (TX25) to pull out the passive filter. Pay attention to the 4 spacers. Tightening torque: T1... -
Page 12: Rear And Inside Rigging
Page 12/29 GEOM10 ETHOD ISASSEMBLY 3.4 Rear and inside rigging Remove the connecting plate, 4 screws (Tx25); Remove 2 screws (TX25 and wrench 10mm), 1 on the top and one on the bottom. Remove the Warning plate, 4 screws (Tx25); Remove the metal reinforcement. -
Page 13: Method Of Disassembly Msub15
MSUB15 Page 13/29 ETHOD ISASSEMBLY MSUB15 ETHOD ISASSEMBLY 4.1 Grille MSUB15 Remove 8 screws (Tx25), 3 on each side, 1 on the top, and 1 on the Remove the 6 screws (Tx30) to remove the bumpers. bottom to remove the grille. Tightening torque: T1 Tightening torque: T1 MSUB15-I... -
Page 14: Rigging
Page 14/29 MSUB15 ETHOD ISASSEMBLY 4.2 Rigging MSUB15 Remove the 5 screws (TX30) to remove the rigging with the connection Remove the 5 screws (Tx30), to remove the rigging. plate. Tightening torque: T2 Tightening torque: T2 MSUB15-I Remove the 5 screws (Tx30), to remove the rigging. Remove the 5 screws (TX30) to remove the rigging with the cable gland. -
Page 15: 15'' Driver
MSUB15 Page 15/29 ETHOD ISASSEMBLY 4.3 15’’ Driver Remove 8 screws (TX25), use a wrench to unscrew the 2 screws located Remove the 16 screws (Tx25) and remove the trap. at the front. Tightening torque: T2 Tightening torque: T2 To pull out the driver: Pull it backwardse. -
Page 16: Spare Parts
Page 16/29 PARE ARTS PARE ARTS Warning: If necessary, spare parts are delivered with screws, nuts, washers, gaskets, use them to maintain products integrity. 5.1 GEO M10... - Page 17 QUANTITY PART NUMBER DESIGNATION 05GEOM10UA Complete grille touring Black 05GEOM10UA-PW Complete grille touring White 05GEOM10LOG NEXO Logo (with 2x starlock) 05DRISSAC-B Sling Black (with rivet - washer) 05DRISSAC-PW Sling White (with rivet - washer) 05LEXM1012 Lexan GEOM1012 Black 05LEXM1012-PW Lexan GEOM1012 White...
-
Page 18: Geo M10-I
Page 18/29 PARE ARTS 5.2 GEO M10-I... - Page 19 Lexan GEOM1025 White 05GEOM10UA-I Complete grille installation Black 05GEOM10UA-IPW Complete grille installation White 05GEOM10LOG NEXO Logo (with 2x starlock) Rear cabinet Black (with screws – gasket) 05GEOM10CAR Rear cabinet White (with screws – gasket) 05GEOM10CAR-PW Left rigging Black (with screws – gasket) 05AMACCGEOM10L-I Left rigging White (with screws –...
-
Page 20: Msub15
Page 20/29 PARE ARTS 5.3 MSUB15... - Page 21 05TRAPMS15-PW White trap (with screws) 15’’ Driver (with screws) 05HPB15NF-078 05HPB15NF-078R/K Recone kit HPB15NF (with screws) 05LOGNEXO12 NEXO Logo (with 2x starlock) 05FTCC38X10 Plastic pad 38x10 (with screw) 05EBMSUB15 Empty cabinet Black (with fasteners) 05EBMSUB15-PW Empty cabinet White (with fasteners)
-
Page 22: Msub15-I
White trap (with screws) 15’’ Driver (with screws) 05HPB15NF-078 05HPB15NF-078R/K Recone kit HPB15NF (with screws) 05LEXSUB15 Lexan MSUB15 05LOGNEXO12 NEXO Logo (with 2x starlock) 05FTCC38X10 Plastic pad 38x10 (with screw) 05EBMSUB15-I Empty cabinet Black (with fasteners) 05EBMSUB15-IPW Empty cabinet White (with fasteners) 05MS15RIGA... -
Page 23: Gmt-Exbarm10L
Page 23/29 PARE ARTS 5.5 GMT-EXBARM10L MARK QUANTITY PART NUMBER DESIGNATION 05LEXEXBM10L Lexan GMT-EXBARM10L 05LEXEXBM10L-PW Lexan GMT-EXBARM10L White 05MLHRBGSTD3.25 Shackle 3.25T 05VGOUP19 Pin 19 with safety pin 05VGOU45X40A Safety pin 4.5x40 (x10) 5.6 GMT-LBUMPM10 MARK QUANTITY PART NUMBER DESIGNATION 05BL825-EL Quick Release pin 8x25L (with sling and screws) 05LEXLBPM10 Lexan GMT-LBUMPM10 (with 7) -
Page 24: Vni-Bumpm10
Page 24/29 PARE ARTS 5.7 VNI-BUMPM10 MARK QUANTITY REFERENCE DESIGNATION 05LEXSAPM10 Lexan Linkbar BUMPM10 05LEXSAPM10-PW Lexan Linkbar BUMPM10 White 05MAILR12AZ Quick link 1T5 05FTCC38x25 Plastic pad 38x25 (with fasteners and spacer) 05LEXBPM10I Lexan VNI-BUMPM10 05 LEXBPM10I-PW Lexan VNI-BUMPM10 White 05BNFIXM10 BNFIXM10 05BNFIXM10-PW BNFIXM10 White... -
Page 25: Vnt-Exbarm10
Page 25/29 PARE ARTS 5.9 VNT-EXBARM10 MARK QUANTITY PART NUMBER DESIGNATION 05MLHRBGSTD3.25 Shackle 3.25T 05LEXBARM10 Lexan VNT-EXBARM10 05 LEXBARM10-PW Lexan VNT-EXBARM10 White 5.10 VNT-GSTKM10L – VNT-GSTKM10S MARK QUANTITY PART NUMBER DESIGNATION 05VER1280 Steel Foot (with fasteners) Plastic pad 38x15 (with fastener) 05FTCC 05LEXGSTKM10L Lexan VNT-GSTKM10L... -
Page 26: Vnt-Mnstkm10
Page 26/29 PARE ARTS 5.12 VNT-MNSTKM10 MARK QUANTITY PART NUMBER DESIGNATION 05LEXMNSTKM10 Lexan VNT-MNSTKM10 05MNSTK10-EXC Lever Lock Kit 05LEXLBMNSTKM10 Lexan LinkBar MNSTKM10 05VLATD5 Button latch D5 5.13 MST-WBMSUB15 MARK QUANTITY PART NUMBER DESIGNATION 05ROUL80 Castor (with fasteners) 05PATINCM28DL Plastic pad (with fasteners) 05LOCK90-75 Latch (with fasteners) 05FTCC... -
Page 27: Gmt-3Casem10 / Gmt-6Casem10 / Mst-2Casemsub15
Page 27/29 PARE ARTS 5.14 GMT-3CASEM10 / GMT-6CASEM10 / MST-2CASEMSUB15 MARK QUANTITY REFERENCE DESIGNATION 05ROU209 Castor 100 without brake 05ROU208 Castor 100 with brake 4 / 6 05FLCLOCK Butterfly Latch 4 / 6 05FLCHAND Sprung Handle... -
Page 28: User Notes
Page 28/29 OTES OTES... - Page 29 Page 29/29 OTES Nexo S.A. AFTER SALE DEPARTMENT Parc d’activité de la dame jeanne F-60128 PLAILLY France Tel: +33 3 44 99 00 70 Fax: +33 3 44 99 00 30 E-mail: after-sale@nexo.fr nexo-sa.com...
Need help?
Do you have a question about the GEO M10 Series and is the answer not in the manual?
Questions and answers