Hisense HRBM503S User's Operation Manual page 20

Installing your new appliance
13
14
6
8. Install the screw hole cover-right 15
(provided in the plastic accessory bag)
to the right-top corner of cabinet.
Remove screw hole cover-left 16 from
the left-top corner of cabinet with the
thin-blade screwdriver and Put the
screw hole cover-left and upper hinge-
right into the plastic accessory bag for
future reference.
16
9. Change screw hole covers and screw
on middle cover plate from left to right
(as shown in figure below).
11
12
6
15
10. Lie the refrigerator backwards,
Remove adjustable bottom feet part 17,
remove 3 self-tapping screws 18 from
the lower hinge –right 19. Unscrew the
lower hinge-right axis then install it on
the reverse hole site, and tighten into
position (change it into lower hinge-
left) . Install the lower hinge-left to the
left-bottom corner of cabinet, Then fix it
with 3 screws, finally install adjustable
bottom feet part 17 on the left-bottom
corner and right-bottom corner of
cabinet.
17
19
18
18