Table of Contents
Advertisement
Installing your new appliance
Reversing the door
The side at which the door opens can
be changed, from the right side (as
supplied) to the left side if required.
Tools you will need:
Not provided
Wrench/8mm
Thin-blade
screwdriver
Thin blade(utility knife e.g. )
Additional parts
(in the plastic bag)
Allen Wrench/4mm
Upper Hinge-Left
Screw Hole Cover
right
Left stop Block for
fridge door
Cross screwdriver
Monkey wrench
Upper Hinge
Cover-left
Middle Hinge-left
Left Door Stopper
for fridge door
Additional parts
(in the plastic bag)
Left stop Block for
freezer door
Warning
When reversing the door, the
appliance must not be
connected to the Power, Ensure
that the plug is removed from the
power socket.
Note
If required, you may lay the
refrigerator on its back in order to
gain access to the base, you
should rest it on soft foam
packaging or similar material to
avoid damaging the backboard
of the refrigerator.
To reverse the door, the following steps
generally recommended.
1. Stand the refrigerator upright. Open
the door to take out all door racks (to
avoid damage) and then close the
door.
Left door Stopper
for freezer door
15
Advertisement
Table of Contents
