Table of Contents
Advertisement
Installing your new appliance
Caution
Please slightly squeeze the door
rack from two sides toward
center and inside of door rack,
and then move it upward when
taking out the upper rack and
lower rack.
2. With the door closed, unscrew 1 and
remove upper hinge cover-right 2 from
the right-top corner of cabinet. Remove
the reed switch 4 and the humidity
sensor unit 5 from the cabinet and
upper hinge cover-right 2, Install them
on the upper hinge cover-left (provided
in the plastic accessory bag). Unscrew
the three screws 3 which are used for
fixing the upper hinge-right (see the
picture below).
3. Remove the upper hinge-right
(please hold upper door by hand when
installing.
1
2
3
4
5
16
Advertisement
Table of Contents
