Table of Contents
Advertisement
Installing and removing the
steam oven
For safety reasons, the steam oven
may only be used when it has been
fully installed.
Do not open the door when the
steam oven is on the floor. This could
damage the door.
Do not open the door until the steam
oven has been installed inside the
housing unit.
Maintain the required minimum in-
stallation height of 36" (914 mm).
It is vital to observe the connection
data in "Electrical connection" under
"Installation".
Securing the steam oven in the hous-
ing unit
Use the recessed grips on each side
of the housing to carry the steam
oven.
The steam generator may malfunc-
tion if the steam oven is not on a
level surface.
The maximum deviation from the
horizontal that can be tolerated is 2°.
Push the steam oven into the housing
unit and align it in the center of the
housing unit.
When doing so, make sure that the
power cord does not get trapped or
damaged.
Open the door using the door tool
supplied (see "Opening the door
manually" under "Frequently asked
questions") or pull the door open by
grasping the sides of the door with
both hands and pulling carefully until
it opens.
Insert the mounting aid into the hole
in the front frame.
Installation
181
Advertisement
Table of Contents
