Introduction, Product Features & Specifications - Kidde P4010ACSCO-WF-CA User Manual

5. Introduction, Product Features and Specifications
introduction
This alarm detects products of combustion using photoelectric technology and carbon monoxide using an electrochem-
ical cell. Many times throughout this User Guide, we will refer to Carbon Monoxide as "CO." Ten (10) years after the
unit was activated, this unit will automatically alert you that it is time to replace the unit. This is called "End of Unit Life"
mode. See Troubleshooting Guide. To help identify the date to replace the unit, a label has been affixed to the side of
the alarm. Write the "Install date" in the space provided, and then write in the "Replace by" date (10 years from initial
power up) in permanent marker on the label prior to installing the unit. noTe: AC power must be connected to
obtain the full 10 year battery and unit life.
Product Features and Specifications:
• Temperature: Operating Range: 4.4°C (40°F) to 37.8°C (100°F)
• Humidity: Operating range: 10-95% RH non-condensing
• Audible Alarm: 85+ dB at 3m (10ft), 3.0 to 3.5 KHz pulsing alarm, with voice messages
"Fire!" and/or "Warning! Carbon Monoxide"
• Smoke Sensor: Photoelectric
• CO Sensor: Electrochemical
• Voice message system
• Smoke Alarm SMART HUSH® Control
• Ambient Light Sensing
• Powered by 120VAC (60 Hz, 53 mA max) wire-in connector with sealed lithium battery backup
• Hardwire Interconnect
• Wi-Fi Compatible to Mobile Device ( Requires 802.11b/g/n (2.4GHz) Wi-Fi ). noTe: wi-Fi features do not
function without AC power.
• One large, user-friendly button
• This Class B digital apparatus complies with Canadian ICES-003.
8