Battery Backup - Kidde P4010ACSCO-WF-CA User Manual

Carbon Monoxide (Co) nuisance
RESET: Pushing the button during CO alarm allows the unit to reset calculations and double check for the presence of
CO. If the unit re-alarms within 6 minutes, it is sensing high levels of CO which can quickly become a dangerous situa-
tion. Move to fresh air and call 911.
wArninG: iT iS iMPoSSiBle To deTerMine THe SoUrCe oF A Co AlArM USinG SiGHT or SMell.
AlwAYS ConSider A Co AlArM eVenT AS dAnGeroUS.

14. Battery Backup

This alarm is powered with AC power, but also contains a sealed lithium battery backup system. No battery installation
or replacement is necessary for the life of the alarm.
noTe: AC power must be connected to obtain the full 10 year battery and unit life. Constant exposure to
high or low humidity or temperatures may reduce battery life.
noTe: If AC power is lost, Wi-Fi features will not function, but the backup battery will still provide smoke and
CO detection.
wArninG: no SerViCeABle PArTS inClUded. do noT ATTeMPT To oPen THe AlArM For AnY
reASon! do noT TrY To rePAir THe AlArM YoUrSelF.
low Battery
This alarm is equipped with a low battery monitor circuit. If the battery capacity is nearing the point where it can no
longer provide adequate power for all alarm functions, the low battery condition will occur. See Troubleshooting Guide.
The unit must be replaced within 7 days of the first occurrence of the "Low Battery Warning" to provide continuous
alarm detection.
CAUTion: THe BATTerY USed in THiS deViCe MAY PreSenT A Fire or CHeMiCAl BUrn HAzArd iF
MiSTreATed. do noT reCHArGe, diSASSeMBle, HeAT ABoVe 100°C (212°F) or diSPoSe oF in Fire.
25