Appendix; Technical Details; Warrenty; Terms Of Production - Flame CHORD MACHINE 2 Manual

7. Appendix

Technical details

Connections:
Ribbon cable adapter for Doepfer bus +/-12Volt
Input PROGRAM:
Input TRANSPOSE: CV input transpose 0..+10v
Input INPUT:
Input CLOCK:
OUT TRIGGER:
OUT 1-4:
OUT ARP/Q:
All CV inputs with 100Kohm impedance.
All outputs are calibrated for 1v/Oct inputs with100Kohm impedance (0..+8v).
Current consumption: ca. +140mA / -20mA
Size: Euro Format 3U / 12HP 60,2 x 128,5 mm

Warrenty

Beginning from the date of purchase a 2-year warranty is guaranteed for this device in case of
any manufacturing errors or other functional deficiencies during runtime.The warranty does not
apply in case of:
- damage caused by misuse
- mechanical damage arising from careless treatment (dropping, vigorous shaking, mishandling, etc)
- damage caused by liquids penetrating the device
- heat damage caused by overexposure to sunlight or heating
- electric damage caused by improper connecting
(wrong power supply/ jacks/ MIDI connections/ voltage problems).
If you have any complaints please contact your dealer or send an e-mail to:
service@flame.fortschritt-musik.de

Terms of production

Disposal

The device is produced with RoHS-conformity (subject to the regulations of the European Union)
and is free of hazardous substances (like mercury, plumb, cadmium and hexavalent chrome).
But electronical scrap is hazardous waste. Please don't add this to consumer waste. For an
environment friendly disposal of waste please contact your distributor or specialist dealer.

Support

Updated and additional informations, updates, downloads and more see:
http://flame.fortschritt-musik.de

Acknowledgment

For help and assistance big thanks to: Schneiders Büro Berlin, Shawn Cleary (Analogue haven,
Los Angeles), Robert Junge, Anne Metzler, Karl Felix Bionek und Ebotronix.
Trigger or CV input program list 0..+10v
CV input of Arpeggiator/quantizer channel 0..+10v
Trigger or CV input of Arpeggiator/quantizer channel 0..+10v
Trigger output quantizer 0/+10v
CV output chord each note 0..+8v
CV output arpeggio or quantizer 0..+8v
conformity: CE, RoHS, UL
19