Program Menu List Edit: Chord Settings, Arp/Q Mode - Flame CHORD MACHINE 2 Manual

CHORD SETTINGS (OUTPUT 1-4)
> pay attention to the brackets!
ROOTNOTE / OCTAVE CHORDS & SCALES
The global root note for chords & scales
can be set here
CHORD INVERSION
Here you can choose your inversion:
root, 1st, 2nd, 3rd
CHORD NUMBER
Change your chord here:
P stands for preset, U for user defined.
ARP/Q MODE
Here you can define how the ARP/Q channel behaves:
CHORD ARPEGGIO
The ARP/Q output emits the same chord as
outputs 1-4. Via the CV INPUT you can control the
arpeggio (see page 13).
SCALE ARPEGGIO
The ARP/Q output emits a scale, which can be
defined by the following parameters. Via the CV
INPUT you can control the arpeggio (see page 13).
STABLE QUANTIZER
The ARP/Q output emits the quantized voltage from
the CV INPUT. The quantization happens
permanently (1ms) and with every new quantized
value the trigger output will emit a short trigger.
CLOCK QUANTIZER
The ARP/Q output emits the quantized voltage
present at the CV INPUT. Notes only get quantized
if there's a clock coming into the CLOCK IN.
The same clock will also be emitted via the
TRIGGER OUT.
LIST:A01
<#C0> root
LIST:A01
#C0 <root> P27
LIST:A01
#C0
LIST:A01
<chord Arpeggio>
LIST:A01
<scale Arpeggio>
LIST:A01
<stabl.Quantize>
LIST:A01
<clock Quantize>
9
CHORD
P27
CHORD
CHORD
root <P27>
ARP/Q
ARP/Q
ARP/Q
ARP/Q