Arc Control Settings - Miller Big Blue 500 Pro Owner's Manual

6-6.

Arc Control Settings

�
Arc Control is not active when the Process/Contactor switch is in the following positions:
Output On
Remote ON/OFF: GTAW (Remote TIG)
Process/Contactor Switch
GMAW/FCAW
Voltage sensing feeder
GTAW (TIG Lift Arc
GTAW (TIG Lift Arc
FCAW-S (NO GAS)
GMAW/FCAW
Wire feeder connects to Remote receptacle
1 When Auto-Crater is off (see Service menu)
2 When Auto-Crater is on (see Service menu)
�
Complete Parts List is available at www.MillerWelds.com
Arc Control
SOFT
(25 to 1)
� (0)
STIFF
(1 to 25)
) � (0)
™
STOP
(–5 to 5)
) � (0)
™
STOP
(–5 to 5)
SOFT
(25 to 1)
� (0)
STIFF
(1 to 25)
SOFT
(25 to 1)
� (0)
STIFF
(1 to 25)
Starting point for stainless steel wire (high inductance) Starting point for stainless steel wire (high inductance)
Starting point for stainless steel wire (high inductance)
Starting point for aluminum wire (low inductance)
Starting point for mild steel wire
Starting point for aluminum wire (low inductance)
Starting point for aluminum wire (low inductance)
Flat or horizontal welds with XX18 electrode with short weld cables
Flat or horizontal welds with XX18 electrode with short weld cables
Starting point for aluminum wire (low inductance).
Starting point for aluminum wire (low inductance).
Starting point.
Starting point for dual shield flux core, vertical overhead
Auto-Stop sensitivity 1 (from most sensitive [-5] to least sensi-
Starting point for dual shield flux core, vertical overhead
tive [5])
Auto-Stop determines the arc length (voltage) threshold the
operator must exceed to terminate the arc. If arc terminates
prematurely, increase the Auto-Stop.
Starting point
Auto Crater sensitivity 2 (from most sensitive [-5] to least sen-
sitive [5]).
Starting point
Starting point for stainless steel wire (high inductance)
Starting point for aluminum wire (low inductance)
Starting point for stainless steel wire (high inductance)
Starting point for stainless steel wire (high inductance)
Flat or horizontal welds with XX18 electrode with short weld cables
Starting point for stainless steel wire (high inductance)
Starting point for mild steel wire Starting point for aluminum wire (low inductance)
Starting point for aluminum wire (low inductance).
Starting point for aluminum wire (low inductance)
Starting point for aluminum wire (low inductance)
Flat or horizontal welds with XX18 electrode with short weld cables
Starting point for dual shield flux core, vertical overhead
Starting point for dual shield flux core, vertical overhead
Flat or horizontal welds with XX18 electrode with short weld cables
Starting point for aluminum wire (low inductance).
Starting point for aluminum wire (low inductance).
Starting point for dual shield flux core, vertical overhead
Starting point for dual shield flux core, vertical overhead
Complete Parts List is available
Complete Parts List is available
Complete Parts List is available
Complete Parts List is available
Complete Parts List is available
OM-290968 Page 37