Percussion Play Surface Fixed Quick Start Manual

Installation Instructions
Surface Fixed
Djembes
Page 1 of 2
Instrument
Components:
Djembes
are pre-
assembled
Weight of heaviest part
Played with hands
BS EN 1176
(1.1)
23kg (Large Djembe)
Surface Fix
Components:
M8x25 Security Screw
1. Assemble Ground Fixing
Posts to base of sambas using
M8x25mm security screws
1.5m
and lock washers. (1.1)( See
Assembly Guide)
2.Arrange Djembes in
desired location and mark
holes to fix to desired surface.
3. Fix to Surface using
recommended ground
anchors (Ground Anchors are
not supplied)
4. Make sure all fixings are
covered and secure using
cover caps provided
Ground Surface
x9
x18
x18
2 Part
Cover Cap
M8 Lock Washer
500mm
500mm
1.5m
CAUTION: Drum
surface can get hot
in direct sunlight, if
possible install in
Djembes will arrive
shaded areas.
on site in pre set
heights.
860mm-710mm
Spares available from
percussionplay.com or from your
local distributor
Install Instrument
with 1.5m free space
(from widest point)
around it.
48 Kg