Percussion Play Surface Fixed Marimba Installation Instructions

Installation Instructions
1.1
Surface Fixed
Marimba
Page 1 of 2
1.2
Instrument
Components:
x4
M6x20 Security Screw
x2
M6 Saddle Strap
x4
M8x60 Security Screw
x4
1.3
M8 Barrel Nut
x4
M8 Square Nut
Weight of heaviest part
BS EN 1176
1.4
1.5
15kg (Notes)
Surface Fix
Pair Large Red
Beaters X2
Components:
M8x60 Security Screw
1. Assemble frame and notes
as shown in images 1.2, 1.3
and 1.4(see Assembly Guide).
2. Attach Surface Fixing Plates
to base of each leg using
fixings provided (See Surface
Fix Post Installation Sheet).
3.Locate Instrument in
desired location and mark
holes to fix to desired surface.
4. Fix to Surface using
recommended ground
anchors not supplied.
5. Make sure all fixings are
covered and secure using
cover caps provided.
6. Beaters can be fixed to
frame with fixings provided
1.5.
Metric
Conversion:
250mm/ 10"
300mm/ 12"
400mm/ 16"
750mm/ 30"
1.5m/ 59"
Ground Anchors
x4
x8
not supplied
2 Part Cover Cap
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m 1.5m
1.5m
1.5m
750mm
Ground Surface
Spares available from
percussionplay.com or from your
local distributor
42 Kg