Specifications - Peavey Automix 2 Operating Manual

Input Specifications:
Function Input z
(ohms)
Microphone
(150 ohms)
Line
(10K ohms)
* Minimum input level (Sensitivity) is the smallest signal that will produce nominal output (2.21dBu) with channel and
master controls set for maximum gain.
** Nominal settings are defined s all control set at 0 dB (or 50% rotation for rotary pots.
EIN:
Phantom Power:
Priority (Channels 1 and 2):
Low Cut Filter:
Common Mode:
Rejection Ratio:
Output Specifications:
Minimum
Function Load Z
(Ohms)
Main Out 600
Aux Out 600
Distortion:
Mic Input to Main Output:
Frequency Response:
Mic Input Main Output:
Mic Input to Aux Output:
AUTOMIX
Nominal Out = 2.21 dBu = 1 Volt
Input Gains
Setting
Min
2k Max Gain
(60dB)
>20k Max Gain
(30dB)
-122dBu (Max gain, terminated 150 Ohms)
+48 Volts at Mic ± terminated
0dB to 9dB
-3dB at 100Hz (6dB per octave)
>65dB at 20Hz Ñ 20kHz
>85dB @ 1kHz
Nominal
+2.21dBu
(1V)
+2.21dBu
(1V)
<0.2% at nominal (20Hz to 20kHz)
20Hz to 20kHz +0/-1 dB at nominal
20Hz to 20kHz +0/-1 dB at nominal
ª

2 SPECIFICATIONS

Input Levels
(to bal. outputs)
Min* Nominal**
-64dBu -43dBu
(0.5mV) (5.5mV)
-35dBu -14dBu
13.7mV (155mV)
Output Levels
Max
+20dBu +16dBm
(7.75V) (6.44V)
(Hi Z load) (600½ load)
+20dBu +16dBm
(Hi Z load) (600½ load)
9
Bal./ Connector
Unbal.
Max
-2dBu Bal. Mic In (+)
(615mV) Mic In (-)
Ground
+27dBu Bal. Line In (+)
(17.4V) Line In (-)
Ground
Bal./ Connector
Unbal. Main Out (=)
Bal. Main Out (+)
Main Out (-)
Ground
Bal. Aux Out (+)
Aux Out (-)
Ground